alors après tu peux essayer VR103 puis VR101, mais n'en fait qu'un à la fois, les 2 autres c'est le focus et à priori c'est ok et pareil repérage au feutre.
VR101 is kind of a by ear pot. There seems to be a small range that works for proper cd playback. Typically it seems to be in the 0 to 45 degree range with 0 degrees being horizontal. You should hear some scratchy funny noises when VR101 isn't adjusted properly. Try and find a quiet spot for it. If you go too far it will get very noisy. Hopefully you can find a spot where the CD audio will start to play.
VR103 is, from what I can tell, an error correction adjustment. Hopefully you have got a CD spinning reliably at this point. You might hear a whiney faint scratchy noise at this point.... adjust VR103 clockwise until the noise goes away. If you go too far, the noise will come back only it will be a lower tone and not sound good.
Try and find the sweet spot where the laser operates quietly.
