Page 1 sur 1

Sharp X-1 Twin Désassemblé

Publié : lun. 19 févr. 2007 15:24
par cosmos99

Publié : lun. 19 févr. 2007 19:17
par xav
Sans la partie alim et adaptation video, elle est encore plus mini :lol:

Publié : lun. 19 févr. 2007 19:24
par cosmos99
T'es sur xav ? J'ai cru lire qu'elle envoyait le composite video au PC ou bien j'ai mal lu ?

Publié : lun. 19 févr. 2007 19:39
par xav
Non non, elle sort un signal video direct du VCE, sans adaptation, c'est dans le reste de la bécanne que l'amplification audio/video ce passe (apparament la carte en pcb orange qui ponte la carte mére et la carte PCE)
This is the PCE riser/interface PCB. It's brown, and does little more than connect the X1 PCB to the PCE PCB. Neither system is in any way aware of the other. No facilities are shared, the X-1 cannot be used as a dev platform and the PCEngine benefits in no way from the pairing with the X-1. For all intents and purposes they're simply two systems in the same box.

That said, there are two lines between the two that I couldn't trace. One is almost certainly composite video, the other one disappeared somewhere en route to the rear of the system. I'm reasonably sure it's just a sync line or something similar.

The PCE does not output RGB through the X1's monitor port, it only outputs composite video and stereo audio, via the AV connectors.
C'est trés TRES limité comme 'fusion", basiquement, c'est 2 bécanes totallement separer, mais dans un méme boitier :(